"Dunba Nano Fuel-saving &Maintaining Fluid for Limousine" is a fuel-saving environmental product, composedof nano-alloy, polymer monomer and multifunctional additives, produced by technical equipment with our ownintellectual property rights (Patent No. ZL200810032849.1) and new scientificand technological achievement.
Fuel economy—saving fuel & engineoil，5%-25% oilconsumption saved;
Strong lubrication—improve lubrication greatly, reduce frictioncoefficient effectively, 80%-90%reductions in engine wear and tear;
Engineprotection—wear and tear repaired dynamically, protect the powersystem permanently, engine life extended 2-3 times；
Fast start—improvesthe initial rotation speed, easier to cold start in winter;
Power strengthening—restore the engine cylinder pressure. Power increased by5%-35%;
Noise reduction—effectively reduce engine noise and vibration;
Corrosion prevention—prevent friction parts from corrosive pitting.；
Environmentally friendly—improve engine oil burning, blue smoke and other conditions,reduce exhaust particles by 20%-30% and smoke emissions by 50%.
3) FourMajor Features
Economic—extend oil drain internals twice, save fueleffectively, reduce the repair cost;
Environmental friendly—effectively reduce exhaust particles andsmoke emissions；
Fast—engineworking environment improved in 15 minutes, noise and vibration reduced, andpower enhanced；
Safe— besuitable for long-term use forvarious small vehicles, no adverse effect or side effects.
Self-repairing: Nano particle repairs the wear &scuffing surface automatically, then fundamentally achieving the enginemaintenance;
Three in one:maintaining,repairing and fuel-saving simultaneously.
This product can be easilyand stably dispersed in all kinds of lubrication oil, suitable for the lubricatingsystem of various small vehicles.
After engine oil change, add the product to engine oiltank, keep the engine idling for around two minutes; or mix the product withengine oil evenly in advance, then add mixed product to engine oil tank. Normal usage is about 2.5% ofthe total lubricating oil, in other words, as for ordinary car, please mix 4liters or 4.24quarts lubricating oil with one bottle (3.53oz or 100 grams).
This product can also be added into gearbox, mixed with gear oil at 2.5% ratio.
1) If because of piston ringbreaking, engine oil leakage due to valve oil seal becoming old, and otherreasons which result to serious engine oil burning, blue smoke discharge andother fault phenomenon, then these are not included in repairing scope of thisproduct. We suggest customers repairing your car, after that use this product.
2) If you haven’t beencleaning the inside of engine for long time, you should clean it before using thisproduct.
3) Noninflammable, inexplosive, in corrosive;
4) Don’t drink and avoid long time skin contact;
5) Protect from impurity and water;
6)Keep in normal temperature and avoid sunlight.